Main Housing Re-Alignment

	Bearing Housing Re-Alignment When the main bearings have either spun in the housings or just been knocked out of round they need to be lined honed. The picture left shows main bearing housings re-aligned back to manufactures specification.
	Oldsmobile V8 Having the full treatment on the main housings Click Here to follow the progress of the rebuild

 

 

 

 

Related resources

• Sunnen Dual-Tech Honing Machine Unique Vertical & Horizontal Honing Machine
• Sizes from 3 " to 4 " dia (76.2mm to 101.60mm)
• Minimum stock removal, usually less than .003" (.076 mm) off the caps compared to as much as .010" (.254 mm) with boring
• Maximum precision, corrects distortion caused by warpage and cap stretch
• Meets or exceeds original factory accuracy for alignment, roundness and size